Wolfbox Wire Holder: Installation Instructions

Thanks for choosing ProtoHype. This wire holder hides the cables that plug into your Wolfbox G900 Pro, G850 or G840 digital mirror.

Before you start

Turn the vehicle off and make sure the mirror is unplugged or powered down.
Have the Wolfbox mirror already mounted with its cables connected.
Clean the mounting surface with a dry cloth if the holder uses adhesive.

Installation

Test fit the holder over the cable connection area without removing any backing.
Route the Wolfbox cables into the channel of the holder.
Snap or slide the holder into position so the cables are fully covered.
Check that the cables are not pinched and the connectors are still seated.
Power on the mirror to confirm everything works.

Care

The holder is 3D printed in ABS-GF (glass-fiber-filled) for heat and UV resistance.
Do not force it. If it does not fit, contact us and we will help.

Installation video

Instructional video coming soon...

Questions? Contact us at protohypedesigns@gmail.com.